725 Series

cardEDGE+

Features

  • .100" (2.54mm) Contact spacing x .200" (5.08mm) row spacing
  • Accepts .062" (1.57mm) nominal thickness P.C. board
  • Low profile insulator body, .550"(13.97mm) high
  • Contact termination options include P.C. tail, and .025" (0.64mm) square wire wrap
  • Press-Fit compliant section for gas tight reliable connection in plated through holes eliminates soldering operations
  • Single or dual row configurations
  • Accepts between contact and In-Contact polarizing keys (Special features if requested)
  • Tools available for insulator and contact removal. Simple "Flat Rock" tooling is used for connector installation.
  • RoHS Compliant & UL Certified
 

Specifications

  • Insulator Material : Thermoplastic Polyphenylene Sulfide (PPS), UL 94V-0, Black Color
  • Contact Material : Copper Alloy
  • Contact Plating : 30u"Gold Plating on mating area and Tin Plating on tails with Nickel underplating all over
  • Current Rating : 3 Ampere
  • Contact Resistance : 10 milliohms Maximum
  • Dielectric Withstand Voltage : 1200 VAC rms at sea level between adjacent contacts
  • Insulation Resistance : 5000 Megaohms Minimum
  • Operating Temperature : -40°C to +105°C
  • Insertion Force : 16oz (4.45N) Maximum per contact pair when tested with .070" (1.78mm) thick gauge
  • Withdrawal Force : 1oz (0.28N) Minimum per contact pair when tested with .054" (1.37mm) thick gauge
  • Contact insertion into Hole : 20 lbs (89 N) Maximum
  • Contact Retention in Hole : 10 lbs (44 N) Minimum
  • Re-Insertability in same Hole : 3 Times Minimum

 

Notes

Ordering Guide:

 
725
 
EDAC  Card Edge Connector | Pressfit
EDAC Card Edge Connector | Pressfit
EDAC Card Edge Connectors
EDAC Card Edge Connectors
EDAC Custom Connectors | Card Edge
EDAC Custom Connectors | Card Edge
EDAC Card Edge Connector | Wire Hole Terminals
EDAC Card Edge Connector | Wire Hole Terminals
EDAC Custom Interconnect Solutions
EDAC Custom Interconnect Solutions

Pressfit Card Edge Connector | Black | 0.100" (2.54mm) Pitch | 0.200" (5.08mm) Row Spacing | Low Profile Insulator


OR

Loading Parts
 

Stocking Distributors

  • TLC Electronics Logo
  • www.onlinecomponents.com Logo
  • PUI Interconnect Distributor LOGO

Have a question for EDAC? Connect with us. Experience makes the difference.

Connect

Cookie Policy

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services. Cookie Policy.

I Accept